Speco Alloys Inc is a very acclaimed Manufacturer , Exporter and Supplier of Titanium Grade 5 Round Bars and Rods that are being sourced by utilizing high quality of raw material. We likewise offer the same in business sector driving costs. Our Titanium Round Bars is made up of very small diameters of wires which is used for welding. These Grade 5 Titanium Bars are utilized for a few applications, for example, in rings, flywheels, medical screws, clutch hats, dental implant studs, tube adapters, fasteners, drive plates, tools, and so on..
The quality of Round Bars & Rods made of titanium by Speco Alloys Inc are in line with customer requirement and maintaining the customer satisfaction level along with various levels of quality testing and in line with the standards.
| Standard | ASTM B348 / ASME SB348 |
|---|---|
| Werkstoff Nr | 3.7165 |
| Grade | Titanium Grade 5 (UNS No. R56400) |
| High Accuracy Size | Dia3.0-20mm x Length ＞3000mm, H9-H7 |
| Normal | Dia6.0-200mm x Length1000-6000mm |
| Specification | AMS 4905, 4911, 4920, 4928, 4930, 4931, 4932, 4934, 4935, 4954, 4963, 4965, 4967, 4993, AMS-T-9046, AMS-T-81915,AS7460, AS7461, ASTM B265(5), B348(5), B367(C-5), B381(F-5), B861(5), B862(5), B863(5), F1472, AWS A5.16 (ERTi-5), MIL SPEC MIL-T-81556 |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc |
| Surface | Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline |
| Application | Chemical process, Food processing, Petrochemical, Pollution control, Pulp and Paper, Refining |
| Standard | Type of pipe | Grade | Al | Fe | O | Ti | V |
|---|---|---|---|---|---|---|---|
| max | max | max | max | max | |||
| UNS R56400 | SMLS & WELDED | 5 | 6 | 0.25 | 0.2 | 90 | 4 |
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
|---|---|---|---|
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile Strength, Ultimate | 950 MPa | 138000 psi | |
| Tensile Strength, Yield | 880 MPa | 128000 psi | |
| Elongation at Break | 14 % | 14 % | |
| Reduction of Area | 36 % | 36 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Physical Properties | Metric | English |
|---|---|---|
| Density | 4.43 g/cc | 0.16 lb/in³ |
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm |
|---|
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 0-100ºC |
|---|---|---|---|
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263J/g°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | &nbps |
| Melting Point | 1604-1660 °C | 2920 - 3020 °F | Liquidus |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F |
Speco Alloys Inc exports TITANIUM GR 5 ROUND BARS & RODS MANUFACTURER AND EXPORTER to Dubai, Sharjah, Abhdhabi, Oman, Qatar, Saudi Arabia, Kuwait, Iran, Iraq, Malaysia, Indonesia, Norway, Nigeria, Algeria, Egypt, Libya, Brazil, Angola, Guinea, Mozambique, Tanzania, Venezuela, Canada, Ecuador, Ghana, Vietnam, Trinidad And Tobago, Thailand, Korea, Taiwan, Australia, Italy, France, Spain, Russia, Germany & Azerbaijan countries.
For further enquiries related to TITANIUM GR 5 ROUND BARS & RODS MANUFACTURER AND EXPORTER kindly get back to us on :-
Call Us:
+91-22-66363501