TITANIUM GR 1 ROUND BARS & RODS MANUFACTURER AND EXPORTER
Speco Alloys Inc is one of the Largest Manufacturer, Exporter and Supplier of Titanium Alloy Grade 1 Round Bars in India. Titanium Grade 1 Round Bars are pure and is the softest titanium, where it has the most astounding ductility. Titanium Alloy Grade 1 Rods has good cold forming attributes and gives astounding corrosion resistance. Titanium Grade 1 Rods likewise has great welding properties and high effect toughness.
They are utilized for a few applications, for example, in Architecture, Automotive Desalination, Dimensional Stable Anodes, Medical, Marine, Processing and Chlorate Manufacturing, and so on. Otherwise called UNS R50250 Bars, our Titanium Alloy Grade 1 Round Bars and Rods are available to our important clients in various scope of measurements, thicknesses and sizes in customized form.
Specification
| Standard |
ASTM B348 / ASME SB348, ASTM F-67 |
| Werkstoff Nr |
3.7025 |
| Grade |
Titanium Grade 1 (UNS No. R50250) |
| Size |
Dia6.0-200mm x Length1000-6000mm |
| Length |
2000mm – 5800mm |
| Finish |
Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Form |
Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc |
| Surface |
Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline |
| Conditon |
Cold Drawned Pulished Cold Drawn Centreless Ground & Polished. |
| Application |
Chemical process, Food processing, Petrochemical, Pollution control, Pulp and Paper, Refining |
Chemical Composition
|
Standard |
Type of pipe |
Grade |
C |
Fe |
H |
N |
O |
Ti |
|
max |
max |
max |
max |
max |
max |
|
UNS R50250 |
SMLS & WELDED |
1 |
0.1 |
0.2 |
0.015 |
0.03 |
0.18 |
99.5 |
Mechanical Properties
| Hardness, Brinell |
120 | 120 | annealed |
|---|
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
|---|
| Hardness, Rockwell B | 70 | 70 | annealed |
|---|
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
|---|
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
|---|
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
|---|
| Elongation at Break | 24 % | 24 % | |
|---|
| Reduction of Area | 35 % | 35 % |
|
|---|
| Modulus of Elasticity | 105 GPa | 15200 ksi | In Tension |
|---|
| Compressive Modulus | 110 GPa | 16000 ksi | |
|---|
| Poisson's Ratio | 0.37 | 0.37 | |
|---|
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
|---|
| Shear Modulus | 45 GPa | 6530 ksi | |
|---|
Physical Properties
| Physical Properties | Metric | English |
|---|
| Density | 4.51 g/cc | 0.163 lb/in³ |
Electrical Properties
| Electrical Resistivity | 4.5e-005 ohm-cm
| 4.5e-005 ohm-cm |
|---|
Thermal Properties
| Heat of Fusion | 325 J/g | 140 BTU/lb | High Purity Ti. |
|---|
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 0-100ºC |
|---|
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 0--315ºC |
|---|
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | 0-540ºC; CTE is higher perpendicular to the c-axis |
|---|
| Specific Heat Capacity | 0.52 J/g-°C | 0.124 BTU/lb-°F | Heat Capacity at 540ºC is 0.67 J/g-ºC |
|---|
| Thermal Conductivity | 16 W/m-K | 111 BTU-in/hr-ft²-°F | annealed |
|---|
| Melting Point | Max 1670 °C | Max 3040 °F | Liquidus |
|---|
| Liquidus | 1670 °C | 3040 °F |
|
|---|
| Beta Transus | 888 °C | 1630 °F | |
|---|
Optical Properties
| Emissivity (0-1) | 0.3 | 0.3 | High purity Ti at 710°C |
|---|
| Reflection Coefficient, Visible (0-1) |
0.56 | 0.56 | High purity Ti; visible light. |
|---|
EXPORTS
Speco Alloys Inc exports TITANIUM GR 1 ROUND BARS & RODS MANUFACTURER AND EXPORTER to Dubai, Sharjah, Abhdhabi, Oman, Qatar, Saudi Arabia, Kuwait, Iran, Iraq, Malaysia, Indonesia, Norway, Nigeria, Algeria, Egypt, Libya, Brazil, Angola, Guinea, Mozambique, Tanzania, Venezuela, Canada, Ecuador, Ghana, Vietnam, Trinidad And Tobago, Thailand, Korea, Taiwan, Australia, Italy, France, Spain, Russia, Germany & Azerbaijan countries.
For further enquiries related to TITANIUM GR 1 ROUND BARS & RODS MANUFACTURER AND EXPORTER kindly get back to us on :-
