TITANIUM GR 2 ROUND BARS & RODS MANUFACTURER AND EXPORTER
Speco Alloys Inc is a profoundly acclaimed Manufacturer, Exporter and Supplier of Titanium Grade 2 Round Bars and Rods that are being sourced by utilizing predominant nature of raw material. Titanium Round Bars requires a significantly more mechanical strategy to make than plate and block, which in any case participate in a manual technique.
These Grade 2 Titanium Bars are utilized for a few applications, for example, in Air frame appliances, skins and chemical industry applications, where maximum formability is necessary with moderate potency. We additionally offer the same in business sector driving prices.
Specification
| Standard |
ASTM B348 / ASME SB348 |
| Werkstoff Nr |
3.7035 |
| Grade |
Titanium Grade 2 (UNS No. R50400) |
| High Accuracy Size |
Dia3.0-20mm x Length ＞3000mm, H9-H7 |
| Normal |
Dia6.0-200mm x Length1000-6000mm |
| Specification |
AMS 4902, 4941, 4942, AMS-T-9046, ASTM F67(2), B265(2), B337(2), B338(2), B348(2), B367(C-2), B381(F-2), B861(2), B862(2), B863(2), F467(2), F468(2), F1341, MIL SPECMIL-T-81556, SAE J467(A40)
|
| Tolerance |
H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Finish |
Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Form |
Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc |
| Surface |
Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline |
| Conditon |
Cold Drawned Pulished Cold Drawn Centreless Ground & Polished. |
| Application |
Chemical process, Food processing, Petrochemical, Pollution control, Pulp and Paper, Refining |
Chemical Composition
|
Standard |
Type of pipe |
Grade |
C |
Fe |
H |
N |
O |
Ti |
|
max |
max |
max |
max |
max |
max |
|
UNS R50400 |
SMLS & WELDED |
1 |
0.1 |
0.3 |
0.015 |
0.03 |
0.25 |
99.2 |
Mechanical Properties
| Hardness, Knoop | 170 | 170 | |
|---|
| Hardness, Rockwell B | 80 | 80 | |
|---|
| Hardness, Vickers | 145 | 145 | |
|---|
| Tensile Strength, Ultimate | 344 MPa | 49900 psi | |
|---|
| Tensile Strength, Yield | 275 - 410 MPa | 39900 - 59500 psi | |
|---|
| Elongation at Break | 20 % | 20 % | |
|---|
| Reduction of Area | 35 % | 35 % | |
|---|
| Modulus of Elasticity | 105 GPa | 15200 ksi | In Tension |
|---|
| Compressive Modulus | 110 GPa | 16000 ksi | |
|---|
| Poisson's Ratio | 0.37 | 0.37 | |
|---|
| Izod Impact | 114 - 171 J | 84.1 - 126 ft-lb | |
|---|
| Fatigue Strength | 300 MPa | 43500 psi | 1E+7 cycles, Unnotched |
|---|
| Fatigue Strength | 425 MPa | 61600 psi | 30,000 cycles, Unnotched |
|---|
| Fracture Toughness | 66 MPa-m½ | 60.1 ksi-in½ | K(Q); annealed |
|---|
| Shear Modulus | 45 GPa | 6530 ksi | |
|---|
Physical Properties
| Physical Properties | Metric | English |
|---|
| Density | 4.51 g/cc | 0.163 lb/in³ |
Electrical Properties
| Electrical Resistivity | 5.2e-005 ohm-cm
| 5.2e-005 ohm-cm |
|---|
Thermal Properties
| Heat of Fusion | 325 J/g | 140 BTU/lb | High Purity Ti. |
|---|
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 0-100ºC |
|---|
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 0--315ºC |
|---|
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | 0-540ºC; CTE is higher perpendicular to the c-axis |
|---|
| Specific Heat Capacity | 0.523 J/g-°C | 0.123 BTU/lb-°F | Heat Capacity at 540ºC is 0.67 J/g-ºC |
|---|
| Thermal Conductivity | 16.4 W/m-K | 114 BTU-in/hr-ft²-°F | annealed |
|---|
| Melting Point | Max 1665 °C | Max 3030 °F | Liquidus |
|---|
| Liquidus | 1665 °C | 3030 °F |
|
|---|
| Beta Transus | 913 °C | 1680 °F | |
|---|
Optical Properties
| Emissivity (0-1) | 0.3 | 0.3 | High purity Ti at 710°C |
|---|
| Reflection Coefficient, Visible (0-1) |
0.56 | 0.56 | High purity Ti; visible light. |
|---|
EXPORTS
Speco Alloys Inc exports TITANIUM GR 2 ROUND BARS & RODS MANUFACTURER AND EXPORTER to Dubai, Sharjah, Abhdhabi, Oman, Qatar, Saudi Arabia, Kuwait, Iran, Iraq, Malaysia, Indonesia, Norway, Nigeria, Algeria, Egypt, Libya, Brazil, Angola, Guinea, Mozambique, Tanzania, Venezuela, Canada, Ecuador, Ghana, Vietnam, Trinidad And Tobago, Thailand, Korea, Taiwan, Australia, Italy, France, Spain, Russia, Germany & Azerbaijan countries.
For further enquiries related to TITANIUM GR 2 ROUND BARS & RODS MANUFACTURER AND EXPORTER kindly get back to us on :-
