Speco Alloys Inc completes the differing prerequisites of our customers and are putting forth an ideal quality Titanium Grade 9 (Ti-3al-2.5v) Sheets & Plates. Titanium Grade 9 has medium strength that falls between Grade 4 and Grade 5. It has excellent corrosion resistance and is used in Aerospace and Industrial applications. Besides, this item is tested on different quality parameters to guarantee perfection. Notwithstanding this, we offer this item to our valuable customers at exceptionally sensible costs.
This Grade has some outstanding features such as`durable finish standard, superb in quality and rust proof.We promise strength and durability of the Sheets & Plates for the long run and its quality is unmatched.
| Standard | GB / T 3621 -44 ASTM B 265, ASME SB 265 |
|---|---|
| Werkstoff Nr | 3.7195 |
| Size | 8mm to 100mm |
| Grade | Titanium GR-9 (UNS R56320) |
| Type | Sheet, Plates, Coils, Flat, Strips, Profile, Blank ,Circle, Ring etc. |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Form | Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
| Application | Aircraft Engineering,Tennis Rackets, Bicycle Frames, Dental Technology. |
| Standard | Type of pipe | Grade | Al | Ti | V |
|---|---|---|---|---|---|
| max | max | max | |||
| UNS R56320 | SMLS & WELDED | 9 | 3 | 95 | 2.5 |
| Hardness, Brinell | 256 | 256 | Estimated from Rockwell C |
|---|---|---|---|
| Hardness, Knoop | 278 | 278 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 24 | 24 | annealed |
| Hardness, Vickers | 280 | 280 | Estimated from Brinell. |
| Tensile Strength, Ultimate | 89900 MPa | 620 psi | |
| Tensile Strength, Yield | 500 MPa | 72500 psi | |
| Elongation at Break | 15 % | 15 % | |
| Modulus of Elasticity | 100 Gpa | 14500 ksi | |
| Compressive Yield Strength | 105 GPa | 100000 ksi | In Tension |
| Notched Tensile Strength | 790 MPa | 115000 psi ksi | |
| Poisson's Ratio | 0.3 | 0.3 | |
| Charpy Impact | 86 J | 63.4 ft-lb | V-notch |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Fatigue Strength | 280 MPa | 40600 psi | 50,000 cycles. Kt (stress concentration factor) = 1.8 |
| Physical Properties | Metric | English |
|---|---|---|
| Density | 4.48 g/cc | 0.162 lb/in³ |
| Electrical Resistivity | 0.000127 ohm-cm | 0.000127 ohm-cm |
|---|
| CTE, linear 20°C | 9.61 µm/m-°C | 5.34 µin/in-°F | 20-95ºC |
|---|---|---|---|
| CTE, linear 250°C | 9.86 µm/m-°C | 5.48 µin/in-°F | 20-315ºC; 9.67 in range 20-205ºC |
| CTE, linear 500°C | 9.97 µm/m-°C | 5.54 µin/in-°F | Average over the range 20-540ºC |
| Specific Heat Capacity | 0.525 J/g-°C | 0.125 BTU/lb-°F | Typical value for titanium alloys.Heat Capacity at 540ºC is 0.67 J/g-ºC |
| Thermal Conductivity | 8.3 W/m-K | 57.6 BTU-in/hr-ft²-°F | Value at 315ºC is 11.8 W/m-ºC |
| Melting Point | Max 1700 °C | Max 3090 °F | Liquidus |
| Liquidus | 1700 °C | 3090 °F | |
| Beta Transus | 935 °C | 1720 °F |
Speco Alloys Inc exports TITANIUM GR 9 SHEETS & PLATES MANUFACTURER AND EXPORTER to Dubai, Sharjah, Abhdhabi, Oman, Qatar, Saudi Arabia, Kuwait, Iran, Iraq, Malaysia, Indonesia, Norway, Nigeria, Algeria, Egypt, Libya, Brazil, Angola, Guinea, Mozambique, Tanzania, Venezuela, Canada, Ecuador, Ghana, Vietnam, Trinidad And Tobago, Thailand, Korea, Taiwan, Australia, Italy, France, Spain, Russia, Germany & Azerbaijan countries.
For further enquiries related to TITANIUM GR 9 SHEETS & PLATES MANUFACTURER AND EXPORTER kindly get back to us on :-
Call Us:
+91-22-66363501