TITANIUM GR 1 SHEETS & PLATES MANUFACTURER AND EXPORTER
Speco Alloys Inc are prominent manufacturers, stockists and suppliers of Grade 1 Titanium Sheets & Plates. Titanium Grade 1 is an unalloyed, low strength titanium product containing low oxygen with high formability; this titanium grade is used in airframes, heat exchangers and desalination units. The Grade 1 Titanium Sheets & Plates at Speco Alloys Inc, follow national and international standards of ASME SB-265 & ASTM B-265 for the manufacturer of Grade 1.
Philips Metal has carved a niche in the market as a superior supplier due to it's in-house facilities and state of the art technology to manufacture stock and supply these Grade 1 Titanium Sheets & Plates.
Specification
| Standard |
GB / T 3621 -44 ASTM B 265, ASME SB 265 |
| Werkstoff Nr |
3.7025 |
| Size |
8mm to 100mm |
| Grade |
Titanium GR-1 (UNS R50250)
|
| Type |
Sheet, Plates, Coils, Flat, Strips, Profile, Blank ,Circle, Ring etc. |
| Finish |
Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Form |
Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.
|
| Application |
Chemical Industry, Aerospace industry, Medical Application.
|
Chemical Composition
|
Standard |
Type of pipe |
Grade |
C |
Fe |
H |
N |
O |
Ti |
|
max |
max |
max |
max |
max |
max |
|
UNS R50250 |
SMLS & WELDED |
1 |
0.1 |
0.2 |
0.015 |
0.03 |
0.18 |
99.5 |
Mechanical Properties
| Hardness, Brinell |
120 | 120 | annealed |
|---|
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
|---|
| Hardness, Rockwell B | 70 | 70 | annealed |
|---|
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
|---|
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
|---|
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
|---|
| Elongation at Break | 24 % | 24 % | |
|---|
| Reduction of Area | 35 % | 35 % |
|
|---|
| Modulus of Elasticity | 105 GPa | 15200 ksi | In Tension |
|---|
| Compressive Modulus | 110 GPa | 16000 ksi | |
|---|
| Poisson's Ratio | 0.37 | 0.37 | |
|---|
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
|---|
| Shear Modulus | 45 GPa | 6530 ksi | |
|---|
Physical Properties
| Physical Properties | Metric | English |
|---|
| Density | 4.51 g/cc | 0.163 lb/in³ |
Electrical Properties
| Electrical Resistivity | 4.5e-005 ohm-cm
| 4.5e-005 ohm-cm |
|---|
Thermal Properties
| Heat of Fusion | 325 J/g | 140 BTU/lb | High Purity Ti. |
|---|
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 0-100ºC |
|---|
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 0--315ºC |
|---|
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | 0-540ºC; CTE is higher perpendicular to the c-axis |
|---|
| Specific Heat Capacity | 0.52 J/g-°C | 0.124 BTU/lb-°F | Heat Capacity at 540ºC is 0.67 J/g-ºC |
|---|
| Thermal Conductivity | 16 W/m-K | 111 BTU-in/hr-ft²-°F | annealed |
|---|
| Melting Point | Max 1670 °C | Max 3040 °F | Liquidus |
|---|
| Liquidus | 1670 °C | 3040 °F |
|
|---|
| Beta Transus | 888 °C | 1630 °F | |
|---|
Optical Properties
| Emissivity (0-1) | 0.3 | 0.3 | High purity Ti at 710°C |
|---|
| Reflection Coefficient, Visible (0-1) |
0.56 | 0.56 | High purity Ti; visible light. |
|---|
EXPORTS
Speco Alloys Inc exports TITANIUM GR 1 SHEETS & PLATES MANUFACTURER AND EXPORTER to Dubai, Sharjah, Abhdhabi, Oman, Qatar, Saudi Arabia, Kuwait, Iran, Iraq, Malaysia, Indonesia, Norway, Nigeria, Algeria, Egypt, Libya, Brazil, Angola, Guinea, Mozambique, Tanzania, Venezuela, Canada, Ecuador, Ghana, Vietnam, Trinidad And Tobago, Thailand, Korea, Taiwan, Australia, Italy, France, Spain, Russia, Germany & Azerbaijan countries.
For further enquiries related to TITANIUM GR 1 SHEETS & PLATES MANUFACTURER AND EXPORTER kindly get back to us on :-
