Speco Alloys Inc is one of the main Manufacturer, Supplier and Exporter of Titanium Grade 5 Flanges that are really produced from high quality of standard raw materials and are outlined according to national and universal measures.
We stocks an assortment of Grade 5 Titanium Flanges (likewise known as Din 3.7164 Flanges and Din 3.7165 Flanges), including Titanium blind flanges, slip-on flanges, weld neck flange, lap joint ribs, futher more. Our various supply of UNS R56400 Flanges will deal with any need you may have, whether you're searching for a raised face flange or an large pipe flange.
We offer these Titanium Grade 5 products in specially designed shapes and sizes according to the prerequisites given by our customers, and that too at a moderate and market driving costs.
| Grades | Titanium Grade 5 (UNS No. R56400) |
|---|---|
| Werkstoff Nr | 3.7165 |
| Standards | ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. |
| Dimensions | ANSI/ASME B16.5, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Specifications | ASTM B 363/ ASME SB 363 |
| Size | 1/2” to 18" |
| Class | 150#, 300#, 600#, 900#, 1500#, 2500#. PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| Standard | Type of pipe | Grade | Al | Fe | O | Ti | V |
|---|---|---|---|---|---|---|---|
| max | max | max | max | max | |||
| UNS R56400 | SMLS & WELDED | 5 | 6 | 0.25 | 0.2 | 90 | 4 |
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
|---|---|---|---|
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile Strength, Ultimate | 950 MPa | 138000 psi | |
| Tensile Strength, Yield | 880 MPa | 128000 psi | |
| Elongation at Break | 14 % | 14 % | |
| Reduction of Area | 36 % | 36 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Physical Properties | Metric | English |
|---|---|---|
| Density | 4.43 g/cc | 0.16 lb/in³ |
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm |
|---|
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 0-100ºC |
|---|---|---|---|
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263J/g°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | &nbps |
| Melting Point | 1604-1660 °C | 2920 - 3020 °F | Liquidus |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F |
Speco Alloys Inc exports TITANIUM GR 5 FLANGES MANUFACTURER AND EXPORTER to Dubai, Sharjah, Abhdhabi, Oman, Qatar, Saudi Arabia, Kuwait, Iran, Iraq, Malaysia, Indonesia, Norway, Nigeria, Algeria, Egypt, Libya, Brazil, Angola, Guinea, Mozambique, Tanzania, Venezuela, Canada, Ecuador, Ghana, Vietnam, Trinidad And Tobago, Thailand, Korea, Taiwan, Australia, Italy, France, Spain, Russia, Germany & Azerbaijan countries.
For further enquiries related to TITANIUM GR 5 FLANGES MANUFACTURER AND EXPORTER kindly get back to us on :-
Call Us:
+91-22-66363501
