Speco Alloys Inc is one of the Largest Manufacturer, Exporter and Supplier of Titanium Alloy Grade 1 Flanges in India. Titanium Grade 1 Flanges are pure and is the softest titanium, where it has the most astounding ductility. Titanium Alloy Grade 1 Flanges has good cold forming attributes and gives astounding corrosion resistance. Titanium Grade 1 Flanges likewise has great welding properties and high effect toughness.
We stocks an assortment of Grade 1 Titanium Flanges (likewise known as Werkstoff Nr 3.7025 Flanges), including Titanium blind flanges, slip-on flanges, weld neck flange, lap joint ribs, futher more.
These are comprehensively invigorating for its quality, disintegration safe, and fine wrapping up. These are available various estimations, specific and thickness as per the clients requirements. These Titanium Gr 1 Flanges are used as a piece of military, glasses, oil and gas, remedial apparatus, petrochemical equipment, and so on.
| Grades | Titanium Grade 1 (UNS No. R50250) |
|---|---|
| Werkstoff Nr | 3.7025 |
| Standards | ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. |
| Dimensions | ANSI/ASME B16.5, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Specifications | ASTM B 363/ ASME SB 363 |
| Size | 1/2” to 18" |
| Class | 150#, 300#, 600#, 900#, 1500#, 2500#. PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| Standard | Type of pipe | Grade | C | Fe | H | N | O | Ti |
|---|---|---|---|---|---|---|---|---|
| max | max | max | max | max | max | |||
| UNS R50250 | SMLS & WELDED | 1 | 0.1 | 0.2 | 0.015 | 0.03 | 0.18 | 99.5 |
| Hardness, Brinell | 120 | 120 | annealed |
|---|---|---|---|
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| Elongation at Break | 24 % | 24 % | |
| Reduction of Area | 35 % | 35 % | |
| Modulus of Elasticity | 105 GPa | 15200 ksi | In Tension |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poisson's Ratio | 0.37 | 0.37 | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Shear Modulus | 45 GPa | 6530 ksi |
| Physical Properties | Metric | English |
|---|---|---|
| Density | 4.51 g/cc | 0.163 lb/in³ |
| Electrical Resistivity | 4.5e-005 ohm-cm | 4.5e-005 ohm-cm |
|---|
| Heat of Fusion | 325 J/g | 140 BTU/lb | High Purity Ti. |
|---|---|---|---|
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 0-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 0--315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | 0-540ºC; CTE is higher perpendicular to the c-axis |
| Specific Heat Capacity | 0.52 J/g-°C | 0.124 BTU/lb-°F | Heat Capacity at 540ºC is 0.67 J/g-ºC |
| Thermal Conductivity | 16 W/m-K | 111 BTU-in/hr-ft²-°F | annealed |
| Melting Point | Max 1670 °C | Max 3040 °F | Liquidus |
| Liquidus | 1670 °C | 3040 °F | |
| Beta Transus | 888 °C | 1630 °F |
| Emissivity (0-1) | 0.3 | 0.3 | High purity Ti at 710°C |
|---|---|---|---|
| Reflection Coefficient, Visible (0-1) | 0.56 | 0.56 | High purity Ti; visible light. |
Speco Alloys Inc exports TITANIUM GR 1 FLANGES MANUFACTURER AND EXPORTER to Dubai, Sharjah, Abhdhabi, Oman, Qatar, Saudi Arabia, Kuwait, Iran, Iraq, Malaysia, Indonesia, Norway, Nigeria, Algeria, Egypt, Libya, Brazil, Angola, Guinea, Mozambique, Tanzania, Venezuela, Canada, Ecuador, Ghana, Vietnam, Trinidad And Tobago, Thailand, Korea, Taiwan, Australia, Italy, France, Spain, Russia, Germany & Azerbaijan countries.
For further enquiries related to TITANIUM GR 1 FLANGES MANUFACTURER AND EXPORTER kindly get back to us on :-
Call Us:
+91-22-66363501
